How To Reset Linksys Velop? The Complete Guide Here!

A well-liked mesh Wi-Fi system called Linksys Velop is provide dependable wireless coverage throughout a house or even many rooms. The Velop nodes could eventually need to be reset because of performance problems, the necessity for debugging, or a full factory reset for resale, just like any other network device. We’ll walk you through the whole process of factory-setting your Linksys Velop system or resetting it to fix connectivity issues in this blog. Let’s examine the many reset kinds, their applications, justifications, and effective execution.

Why Would Resetting Your Linksys Velop Be Necessary?

You may need to reset your Linksys Velop system for a number of reasons. 

• Network Connectivity Problems: By re-establishing a new connection to your network, a reset may frequently fix problems with poor speeds, sporadic connectivity, or losing connections on your devices.
• Forgotten Admin Keyword: You can reset your Velop system back to factory settings in order to recover control and reset fresh credentials if you’ve lost access to the admin interface or forgotten the keyword.
• New Network Setup: Resetting your Velop system will remove any outdated configurations and enable you to create a brand-new network from start if you’re moving to a new house or switching internet service providers.
• Selling the Velop or Giving It Away: You should remove all of your personal network settings from the Velop system by resetting it to factory defaults before transferring ownership to another individual.
• Firmware or Configuration Problems: Occasionally, inconsistent system behavior might be brought on by firmware upgrades or incorrectly configured settings. These bugs can be remove with a reset.

Types of Linksys Velop Resets

It’s important to know that there are two primary reset kinds for Linksys Velop systems before performing one

• Soft Reset: Rebooting your Velop node(s) using a soft reset keeps all of your setups and settings intact. Usually, it is used to address minor connection or performance concerns.
• Hard Reset (Factory Reset): This kind of reset returns the Velop node or nodes to their original factory configuration. You will have to start the system over from scratch since any personalized settings, including the network configurations, keywords, and Wi-Fi name (SSID), will be removed.

Let’s go over each of the two reset techniques in detail.

How To Soft Reset A Linksys Velop Device?

Refreshing the network with a soft reset of your Velop node(s) will assist if you’re experiencing intermittent connection problems. How to do a soft reset is as follows:

Through Linksys App:

• Get The Linksys App Open: If you haven’t already, download and install the Linksys app on your smartphone.
• Sign in: Enter your admin login information to access your Velop system.
• Locate and Open the Network Map: Select the “Network Map” option from the dashboard to get a list of all of your Velop nodes.
• Choose The Node: Select the node you want to restart. This might be a child node or the main node, which is link to your modem.
• Reboot: To “Reboot” the node, select this option. When you click this, the selected node will restart, resolving the majority of minor connection problems.

Using The Power Cycle Approach:

• Disconnect The Velop Node: Remove the node from the power outlet physically.
• Hold On: To make sure the node shuts down entirely, leave it for around thirty seconds.
• Reconnect The Plug: Wait for the node to completely restart after reconnecting it to the power outlet. It ought to automatically establish a new network connection.
• A soft reset is a fast repair for small problems and won’t remove your settings. It could be necessary for you to do a hard reset if the issues continue.

How To Hard Reset a Linksys Velop (Factory Reset)?

Since it removes all settings and returns the Velop system to its initial factory configuration, a hard reset is more thorough. This is perfect for fixing serious problems, recovering admin keywords, or getting the Velop ready for a new owner. How to do a hard reset is as follows:

How to Use the Reset Knob?

• Find the “Reset” knob: There is a tiny reset knob (typically to avoid inadvertent pushes) on the bottom of every Velop node.
• Press & Hold: Press and hold the reset knob for ten seconds using a paperclip or pin.
• Look at the LED: The node’s top LED light will turn red, signaling the start of the reset procedure.
• Await Finalization: Once the LED begins to flash red, keep pushing down the reset knob and let go of it. For the node to completely reset, a few minutes will pass.
• Reestablish Your Network Connection: The LED will change color to indicate that the reset is complete and the node is ready to be reconfigure. Your Linksys Velop system may now be configure as though it were a brand-new one.
• Restarting Through Linksys App:
• A factory reset may also be carry out using the app, if you can still access it:
• Get the Linksys app open: Enter your admin credentials to log in.
• Choose the Node: Go to the “Network Map” and pick the node that has to be reset.
• Return to the factory settings: Search the settings menu for the “Reset Node” or “Factory Reset” option.
• Verify: To confirm the reset operation, adhere to the prompts.

What Takes Place Following a Factory Reset?

Your Velop system will function as though it has just out of the box once the factory reset is finished. You’ll have to configure your Velop network from scratch when all of your customized settings are erase.

Here’s how to carry it out:

• Get the Linksys app open: Launch the Linksys app after the reset.
• Observe the setup guidelines: Get the Linksys app open. Launch the Linksys app after the reset.
• Observe the setup guidelines: During the setup process, the app will walk you through configuring your Wi-Fi network name, keyword, and other settings step-by-step.
• Re-join Devices: Using the new Wi-Fi credentials, you must rejoin all of your devices after configuring your network.

Things to Consider Prior to Resetting

Prior to initiating any reset, take into account the following:

• Backup Your Settings: Before doing a factory reset, try to take a note of all of your existing settings, including Wi-Fi names, keywords, and any custom configurations. These will be remove.
• Reboot vs. Reset: Prior to choosing a factory reset, attempt a reboot (soft reset). Often, small network problems can be resolve by rebooting without erasing your settings.

Final Thoughts

A straightforward yet effective troubleshooting method for fixing connectivity issues, regaining access, or starting over with a fresh network setup is to reset your Linksys Velop equipment. Following the correct procedures guarantees that your Velop system is operating at peak performance, whether you select for a hard reset to erase all settings and start over or a soft reset to address minor issues.

Always try a soft reset first to see if it fixes the issue before attempting a hard reset. After you’ve finished resetting, the Linksys app makes it simple to adjust your Wi-Fi setup, allowing you to quickly bring all of your devices back online.