Unable To Add New Nodes To Linksys Velop? Easy Solution Here!

Linksys Velop is a strong mesh Wi-Fi system that’s meant to give seamless, high-speed coverage across your house. The Velop system is design to remove dead spots and provide reliable Wi-Fi service across your whole home, regardless of how big or tiny your flat is. However, what occurs if you attempt to add new nodes to Linksys velop but they just refuse to connect?

There are a few troubleshooting actions you may do if you’re having problems adding more nodes to your Linksys Velop mesh system. This blog will walk you through typical problems and workarounds for expanding your Velop network with new nodes.

Know How to Use Linksys Velop System

The Linksys Velop system must be understood before doing any troubleshooting. Typically, a Velop system includes a primary router node along with several satellite nodes to increase your Wi-Fi network’s coverage area. As you walk throughout your house, your devices will be able to stay connect to the strongest signal thanks to the mesh network that is create by these nodes communicating wirelessly with one another.

Add new nodes to Linksys velop is typically as easy as placing the node within range of the current nodes and then using the Linksys app to add it. However, one of the following causes is probably at blame if you have trouble adding new nodes.

Typical Causes of Add New Nodes To Linksys Velop Not Connecting

Poor Node Placement or Weak Signal

Being position too far away from the main node is one of the most frequent causes of new nodes not connecting. To connect, the satellite node has to be in the primary node’s Wi-Fi range. The new node will not be able to link to current network if the signal is too faint.

Outdated Firmware

Firmware updates are often release by Linksys to boost security, address issues, and improve performance. Outdated firmware on either your new node or your main node may cause connectivity problems, making it impossible to add more nodes to the system.

Interference in Networks

During the setup procedure, issues may arise due to network interference from other electronic devices or networks. The wireless communication between your Velop nodes may be disrupt by other devices.

Software or App Error

When it comes to setting up your Velop system, the Linksys app is essential. Occasionally, app bugs may make it impossible to create new nodes. An out-of-date version of the app or other issues with the app might be the cause of this.

Misconfigured Wi-Fi Configuration

When adding new Velop nodes, the connection process may be disrupt if you have alter the Wi-Fi configurations, such as the network name (SSID) or password, after configuring the original nodes. Validate that all of devices have equivalent and accurate Wi-Fi settings.

How To Troubleshoot Linksys Velop to Add New Nodes?

Let’s go over the troubleshooting actions you can take to fix the problem now that you have a better understanding of why your new nodes might not be connecting.

Verify The Placement Of The Nodes

• Make sure the new node is within range of the current Velop node before attempting any more debugging. 
• Try bringing the new node closer to the primary node to connect if it’s too far away. 
• The new node should ideally be situated close to the existing nodes but in an area with a high signal.
• Advice for Appropriate Location: Position the node halfway between the main node and the location where Wi-Fi coverage is required.
• Steer clear of positioning the node behind big, potentially interference-causing metal items or appliances.

Firmware Update 

• • Make sure the firmware on your Linksys Velop system is up to date to guarantee maximum performance. This is how firmware may be updated:
  • On your tablet or smartphone, launch the Linksys app.
  • Go to the “Router Settings” area.
  • Look under “Firmware Apprise” to see what apprises are accessible. Update your firmware by following the instructions if there is one available.
  • Advice: Make careful to update your principal node first at all times. If more nodes need to be updated, app will ask you to do so.

Give Devices a Restart

• • Many connectivity problems can be resolute with a simple restart. 
  • Restart the new node, your modem, and your primary node. This might assist in resetting any transient connectivity problems.
  • Unplug the new node, main Velop node, and modem’s power cords. Before reconnecting them, wait for around 30 seconds.
  • Let every gadget completely restart and reconnect.

Add The New Node Using Linksys App

• Launch Linksys app, then log in with your credentials.
• To include the new node in your network, select “Add a Node” from the main screen and adhere to the prompts.
• Verify that the new node is within range of the primary Velop node.
• The setup progression will take time and app will walk through every step. 
• The app will notify you to move the node closer if it determines that it is too far from the current network.

Reduce Interference

• When setting up, try to reduce any interference. 
• Disable any other wireless equipment that could be interfering with the signal, such as microwaves, baby monitors, or other routers using the same channel. 
• Interference may also result from your neighbours sharing a Wi-Fi channel. 
• To lessen overlap in these situations, think about modifying the Wi-Fi channel settings via the Linksys app.

Clear the Fresh Node

Resetting the new node to its factory defaults is worthwhile if none of the aforementioned fixes work. If there is a problem preventing the node from joining or if it has been setup wrongly, this might be helpful.

A Velop node can be reset by:

For approximately ten seconds, press and hold the node’s reset button until the LED begins to flash. Try using the Linksys app to add the node to the network once more once it has been reset.

Look for Hardware Problems

If you’ve tried all of the above techniques and still cannot add a new node, it’s conceivable there’s an issue with hardware. Contact Linksys customer service for more assistance. They can walk you through more complex troubleshooting procedures or assist you in resolving any possible hardware malfunctions.

Final Thoughts

Although the Linksys Velop mesh Wi-Fi system is easy to use and scalable, it can occasionally have problems like any other technology. There are a number of typical reasons and simple fixes you may attempt if you’re having trouble add new nodes to Linksys velop. Most problems may be fixed with a few easy actions, ranging from correct node placement and firmware updates to lowering interference and restarting your devices.